How to Pick Out Replacement Hubs for 28 Continental Cargo Trailer
Question:
Hello- I need new bearings, races and brakes for my 28 Continental Cargo Trailer. Need help identifying my second 28 Continental Cargo trailer with Lippert Axles. Thanks,
asked by: Brian M
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 12" Diameter - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: seal
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Suspension Enhancement
- Search Results: grease caps
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Bearing Buddy Bearing Protectors - Model 1980-SS - Stainless Steel (Pair)
- Shop: SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Underslung
- Video: SuperSprings SumoSprings Trailer Helper Springs Review
- Search Results: 171256500tb seal
- Q&A: Troubleshooting Overheating Hubs on a Trailer With New Bearings and Grease
- Q&A: What is Normal Temperature Rating for Trailer Hubs
- Video: Remove and Reinstall a Trailer Hub Review
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Search Results: dust caps
- Search Results: dust cap
- Q&A: Potential Causes for Trailer Hub to Heat Up
- Q&A: How Hot is Too Hot for Trailer Hubs
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: MORryde Hitch Mounted Stabilizer for 2" Trailer Hitches
- Q&A: What Side of Axle Does SumoSprings Trailer Helper Springs # TSS-106-40 Install On
- Q&A: Recommended Trailer Suspension to Dampen Road Shock
- Q&A: Will SumoSprings Trailer Helper Springs # TSS-106-40 Work Well on Trailer with 2,990 GVWR
- Video: Review of Bearing Buddy Trailer Bearings Races Seals Caps - Caps - BB84SR
- Search Results: t4839100