Best Bearing Kit for 2015 Aliner Ranger 12 with 3000-lb Off-Road Axle
Question:
I have an 2015 ALiner Ranger 12 with a 3000lb axle and 14” tires. By chance do you know wheel bearings I need? Thank you
asked by: David H
Expert Reply:
I checked the specs on the Aliner Ranger 12 on their website and the optional off-road axle is indeed rated for 3000-lbs. They do not provide bearing information unfortunately.
There are common bearing sets used in axles of any given weight capacity and the linked article lists these. Typically a smaller single axle RV will have an axle that is actually rated for 3500-lbs. Axles with this rating most often use inner bearing # L68149, outer bearing # L44649 and grease seal # 58846. If your Aliner happens to use these parts you can use the kit # BK2-100 that you referenced which includes bearings, races, grease seal, tang washer and cotter pin.
The foolproof way to know which replacement bearings and seal to use is to pull one of the hubs and remove those parts so you can wipe them clean and find their part numbers. The photo I linked for you shows the usual placement of the part numbers.
You may also care to order bearing grease # L11380.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Lithium Complex-Based
- Standard Bearing Grease
- Polyurea - Conventional
- 16 oz
- LubriMatic
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Dexter Multi-Purpose Lithium Grease - 14 oz. Cartridge
- Article: Overview of Lubricating Grease
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Difference Between RG06-050 and Timken TMK58ZR Grease Seal
- Q&A: Tips for How to Identify a Trailer Axle