Weight Distribution System Recommendation for Mallard M27 Trailer
Question:
I have a 2017 f150 4x2 super crew 3.5 economy boost 10 speed transfer and max tow package. Will I be able to tow a mallard m27 and what distribution hitch do I need ? I also have electric brake control installed.
asked by: Clyde G
Expert Reply:
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
I looked up the specs of your Mallard M27 and it's tongue weight is most likely going to be right at 600 lbs. The best weight distribution system we offer then for your application would be the Reese Strait Line part # RP66083 which has a tongue weight range of 400-800 lbs and features the best sway control that works to fight sway before it starts.
For a 2 inch ball you would want part # A-90 and for a 2-5/16 inch ball # 19286.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 8,000 lbs GTW, 800 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 500 lbs
- 600 lbs
- 700 lbs
- Reese
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 400 lbs
- 500 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Weight Distribution System for Heartland M27 Mallard Travel Trailer
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for Prewired RVs - 7" Screen
- Video: Fastway e2 Weight Distribution Review
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Are Replacement Spring Bars Available For The Curt TruTrack 4P Weight Distribution System # C74RV
- Q&A: Help Finding a Hitch Extension For Towing a Car Trailer Behind a 2023 Ford F-250 With Truck Camper
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Recommended Weight Distribution Hitch For Towing a 2023 Scamp 16 Travel Trailer
- Q&A: Lighter Weight Spring Bars for the Blue Ox TrackPro Weight Distribution System
- Article: Determining Trailer Tongue Weight
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Best Weight Distribution With Sway Control for Scamp 13 Trailer
- Q&A: Weight Distribution Hitch for 5000-lb Travel Trailer Towed by 2017 Toyota 4Runner
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)