Troubleshooting Brake Controller that Shows OC and SC Code and Doesnt Work
Question:
It will not light up showing brake pressure applied. When hooked up, when applying pressure to brake pedal, brakes grab hard immediately. One time showed OC and another SC. Will not work on any of the trailers. What do we do?
asked by: Cherie
Expert Reply:
Testing the brake controller is fairly easy. Sever the blue brake output wire near the brake controller leaving enough room to reconnect it and then apply the manual slide. Using a circuit tester like the Quickee Tester, part # PTW2993, you should get output to the controller side of the wire you severed. If the manual slide activates the trailer brake output wire properly, try the brake pedal. If the brake pedal activates the brake output properly also then the problem is farther back either in the vehicle wiring or on the trailer.
If either the brake pedal or the manual slide are not functioning properly you will need to test the wires going into the brake controller. Make sure you have power entering the brake controller on the black wire. On the red wire you will only want power when the brake pedal is pressed.
If there is power on the red wire before the brake pedal is pressed you have connected the red wire from the brake controller to the wrong circuit. You would then need to find the brake switch wire that has power ONLY when the brake pedal is activated.
If these connections check out and the brake controller is properly grounded then there is possibly a problem inside the brake controller.
I am including a link to a video that will show you how to test the wiring on a brake controller.
Products Referenced in This Question
Product Page this Question was Asked From
Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer Brake Controllers
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: Installing Wiring for an Electric Brake Controller on an Isuzu N-Series Truck
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Parts Needed For Tekonsha Prodigy P2/P3 Trailer Brake Controller on 2001 Ram 1500 No Tow Package
- Q&A: Parts Needed to Activate 12 Volt Charge Circuit of 7-Way on 2022 Tiffin Wayfarer on Sprinter Chassis
- Q&A: Parts Needed to Install Redarc Tow Pro Elite in 2008 Dodge Sprinter with 7-Way
- Q&A: Best Trailer Hitch Recommendation For a 2024 Toyota Highlander
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Wiring Needed For Installing a Trailer Brake Controller and 7-Way on a 2024 Toyota Grand Highlander
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer