Brake Controller and 7-Way Recommendation for 2019 Jeep Wrangler Unlimited

Question:

I need to install a 7-way and brake controller in my 2019 Jeep Wrangler Unlimited, what all do I need? It has no trailer wiring currently.

asked by: reno

Expert Reply:

To install a 7-way and brake controller in your 2019 Jeep Wrangler Unlimited first requires you to install a 4-way connector part # 118786 which provides all of the trailer lighting functions and then convert to a 7-way with the part # ETBC7 which the 4-way plugs into and comes with everything needed to wire up a brake controller. I attached an install video for this kit on a similar 2012 Jeep Wrangler Unlimited as yours for you to check out as well.

For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy. It can easily be transferred to future vehicles as well.

expert reply by: Jameson C

James

5/30/2020

I’m looking to upgrade my 2017 Jeep Wrangler Unlimited from a 4-pin trailer connection to a 7-pin with brake controller to pull an R-pod travel trailer. What will I need? Thank you.

Chris R.

6/3/2020

My personal recommendation here is a combination of the Wiring Kit # ETBC7L and the Curt Echo Brake Controller # C51180. The Wiring Kit includes everything you need to convert your 4-Way to a 7-Way (plus wiring to activate the 12V circuit). The Curt Echo then simply plugs into the 7-Way and pairs to your smart phone via Bluetooth, eliminating the need to add anything extra inside the vehicle (like with just about any other controller).