What Trailer Hitch Fits a 2012 Ford Fiesta 4-Door Sedan
Question:
I have a 2012 Ford Fiesta SEDAN is this curt c11067 hitch for a HATCHBACK only or can it be installed on a Sedan as well ? Thanks
asked by: Augusto M
Expert Reply:
I do have a hitch for you that will fit the 2012 Ford Fiesta Sedan. It is the Curt Trailer Hitch # C11055. I have included a link to the installation instructions for you.
If you plan on doing some towing, the correct ball mount is # 3593, and you can use pin and clip # PC2. For a ball, use # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring, use the T-One Vehicle Wiring Harness, # 118422. I have included a link to the installation details and a link to a video showing a typical installation.
The CURT Hitch, # C11067, is not listed as a fit for the sedan model.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- Draw-Tite
more information >
