Draw-Tite Class I Hitch Fit for 2004 VW Golf GTI VR6
Question:
The same hitch is listed twice, one says fits vr6 models, the other says it will not fit. When you go to the link for the hitch, both say vr6 models excluded. Can I have some clarity on this? Thanks
asked by: Matt
Expert Reply:
Draw-Tite Class I hitch # 24679 is a confirmed fit for the 2004 VW Golf, including the VR6 version of this vehicle. I verified this with Draw-Tite.
In our Fit Guide we show the hitch twice since on some makes and models of cars a hitch may fit one but not the other. In the case of your VW Golf the hitch # 24679 fits BOTH the VR6 and non-VR6 versions.
If you also need a 4-pole trailer wiring harness the item to use is # 119178KIT. For a ball mount for towing a small trailer the part you want to use is # 3594, and this can be used with either 1-7/8-inch hitch ball # 19256 or 2-inch ball # 19258.
![Adam R](https://images.etrailer.com/static/images/catg/people/477_tn.jpg)
Products Referenced in This Question
Tekonsha Tail Light Converter with 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 1-1/2 Feet Long
- Universal Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 4 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Replace an RV Roof Vent Cover
- Q&A: Can Trailer Tires be Used on a Tow Dolly
- Q&A: Trailer Hitch for 2000 VW New Beetle
- Q&A: Trailer Wiring Recommendation for 2005 Volkswagen New Beetle Convertible
- Article: Rooftop Cargo Carriers
- Q&A: How to Use Stabilizing Strap on a 2000 VW Beetle with a Curt Hitch and Thule T2 Classic Bike Rack
- Q&A: Installation Torque Values/Specs for Draw-Tite Trailer Hitch # 75282
- Q&A: Replacement 18-3/8" Long Double Eye Leaf Spring for Yacht Club Pontoon Trailer
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Hitch Receiver Sizes
- Q&A: WFCO WF-9960 Replacement Converter
- Article: Which Hitches are Made in the USA
- Article: Determining Trailer Tongue Weight
- Article: Trailer Wiring Diagrams