Parts Needed to Tow a Trailer with a 2018 Jeep Grand Cherokee Laredo
Question:
I didn't get the tow package on my 2018 GC Laredo. I only need to tow a small utility trailer every now and then. What do I need?
asked by: Jack
Expert Reply:
First you need a trailer hitch receiver. I recommend the Draw-Tite, part # 75699, because I like how the crosstube is completely hidden behind teh Jeep's bumper and not showing. The other hitch, Curt # C13182, is much more visible under the bumper. I've attached a couple pictures so you can see the difference. Both install videos are linked as well.
Next up is a ball mount to fit into the receiver. I've linked our selection that fits the Class III, 2 inch receiver as well as an article to help you determine which rise or drop you need. You might check out our ball mount kit, part # 989900, which includes a couple of ball mounts and hitch balls of different sizes but you want to make sure it's right for you first.
Finally, the Jeep needs a wiring harness to power the trailer's lights. You said it's a small utility trailer so I assume it only has a 4-way connector. If you need a 7-way let me know. For a 4-way we have part # 118727. It plugs inline with the Jeep's wiring behind each tail light. I've linked an install video for you.
In addition to the parts I've mentioned I've also linked a few articles on installing a hitch and some general articles on towing that you might find helpful.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 6000 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Will any of the Hitches for a 2019 Jeep Grand Cherokee Laredo Fit with 20 inch Spare
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Install Pictures for the Curt Hitch part # C13065 on a 2014 Jeep Grand Cherokee
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Torque Specs for the Class III Draw-Tite Max-Frame Trailer Hitch on a 2011 Jeep Grand Cherokee
- Q&A: Fit of Draw-Tite 75713 Hitch on 2018 Jeep Grand Cherokee Upland
- Q&A: Does Draw Tite Hitch 75699 Fit 2021 Jeep Grand Cherokee Limited
- Q&A: What Does etrailer.com Hitch for 2017 Jeep Grand Cherokee Look Like Installed
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Hitch Installation Tips
- Article: Rolling on a Budget: Top Wallet-Friendly Platform Bike Racks