Wire Functions for Klauber Motor K01285-400 and LC130057

Question:

I rec d my motor, and thanks for the fast service. Now I need the correct wiring dia. for it.thanks,

asked by: A.w. F

Expert Reply:

I spoke to a technical person at Klauber and he provided me with the following information:

"There should be letter in your model number where the dash is. We only have three 400 series models we sell / sold to Lippert, so that letter may be a moot point. All three models have a standard two wire connection. There is a RED and a BLACK wire coming from the motor that will connect to the two power leads from the controller/switch. If the motor is running backward according to the switch, reverse the RED & BLACK leads. We only provide the gearmotor, so I can’t confirm which direction correlates to extend / retract.

For the 2nd unit (the one from the link) # LC130057, Lippert wanted to separate the brake function on some of their models from the motor power. If you only have a 2 wire system providing power to the motor and need to use this model, the easiest solution is to cut the plug off, strip the wires, and twist the brown and red leads together. You can now make your connections similar to the first model above."

expert reply by: Michael H