Weight Distribution and Sway Control Recommendation for Trailer with 350-400 lb Tongue Weight
Question:
Have small travel trailer, 16, tongue weight 350-400 lbs. Please recommend a weight distribution system and compatible anti sway system. I would like to avoid having to weld a steel plate for the ball reciever on the anti sway unit. Towing with 2004 Toyota 4 runner with factory tow package. Just ordered the Tekensha Primus IQ brake controller from you guys. Thanks
asked by: Terry F
Expert Reply:
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
For a loaded tongue weight of 350 to 400 lbs that best weight distribution with sway control is the Strait-Line system part # RP66082 which has a tongue weight range of 200-600 lbs and features only sway control that works to fight sway before it starts. There would be no welding needed to install this kit either.
For a 2 inch ball you'd then want the part # A-90.
Products Referenced in This Question
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Product Page this Question was Asked From
Reese Weight Distribution System w Shank - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Can You Convert to 2-1/2 Inch Shank From 2 Inch With Reese Weight Distribution Hitch
- Article: Determining Trailer Tongue Weight
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Weight Distribution Recommendation for Trailer with 900 lbs Max Tongue Weight Rating
- Q&A: What Is The Recommended Lug Nut Torque On 7,000lb Axles?
- Q&A: Correct Tire Pressure for ST235/80R16 Trailer Tires
- Q&A: Will B and W Continuum Weight Distribution Work Well with East To West 2900KBH
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Will The Firestone Ride-Rite Air Bag Helper Springs Fit 2023 Chevrolet Silverado 1500 w/ 3.0L Diesel
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)