Are BOLT Locks Available to Code with Nissan Vehicle Key

Question

Question:

Do your locks also work on Honda and Nissan keys I didn’t see it on the list of vehicles

asked by: Doug

0

Expert Reply:

Our assortment of BOLT code-able locks includes one for Nissan vehicles. We offer BOLT Trailer Hitch Receiver Lock # BL7023583 which works with two types of keys from a range of Nissan vehicles.

You can refer to the linked photo that shows the two compatible key types and the listing of vehicles that can code this lock.

We do not have one for Honda at this time.

expert reply by: Adam R

0

click to enlarge

Answer 1

Yes, you can get all of the locks you have mentioned keyed alike as long as you order from our Keyed Alike locks page. If you order all the locks you need at the same time they will come keyed alike. If you decide you need another lock keyed the same…

view full answer...

Answer 2

From the top of the B and W Tow and Stow part #BWTS10043B down to the bottom of the unused ball when it is in it's lowest position measures 14 inches. The 7 inch drop version part #BWTS10040B instead has this distance at 12 inches.

view full answer...

Answer 3

It won't be harder to pull; a Class D with its 1,710 lb per-tire capacity is certainly viable and move up for the higher capacity and speed rating. Go with the 81 mph Kenda Karrier ST185/80R13 Radial Trailer Tire - Load Range D #AM10208.

view full answer...

Answer 4

I would love to help but I can't really tell you if you need the B&W Tow & Stow 2-Ball Mount with 5" Drop part #BWTS20037B (part #BWTS20037C) or 7" Drop part #BWTS20040B (part #BWTS20040C) as it varies by application so you will…

view full answer...

Answer 5

From the top of the shank to the bottom of the vertical section of the B&W Tow & Stow 2-Ball Mount #BWTS10040B measures 10". Then with the 2" hitch ball in the lowest position the 2-5/16" hitch ball will sit about 12"…

view full answer...

Answer 6

When adjusted so it's at its maximum drop, the B & W #BWTS10040B Adjustable Ball Mount measures 7 inches from the inside top of the receiver to the base of the trailer ball, at maximum rise, the height difference is 7-1/2 inches as shown in…

view full answer...

Answer 7

The K-Source Custom Flip Out Towing Mirror - Electric/Heat - Textured Black - Driver Side Item #KS60114C will need to manually be flipped out and the actual glass mirror will be controlled by the mirror button inside of your vehicle. So if you set…

view full answer...

Answer 8

The ideal height will actually have to do with how tall the coupler of the trailer is from the ground. The Draw-Tite #76020 will sit at 13 1/2 inches from the ground to the top of the hitch when installed on a 2016 Mazda CX-9. From what I could find…

view full answer...

Answer 9

We definitely recommend using a weight distribution hitch for towing your trailer on your Sante Fe XL. Not only does a weight distribution provide you the comfort and peace of mind of an easier drive, it also helps ease the stress put on the…

view full answer...

Answer 10

I do have an option for you but SuperSprings does not offer any additional spacers for the SumoSprings Trailer Helper Springs part #SS26MV. That said, we do still have spacers that will work for this, the Timbren Spacer part #A25723-90AH00 for…

view full answer...

Answer 11

The SumoSprings Trailer Helper Springs item #SS26MV require 5-5/16" - 6-1/2" of clearance. This is from the top of the spring plate to the bottom of your trailer. Since you are right at 5" you should be ok once you jack your trailer up…

view full answer...

Are BOLT Locks Available to Code with Nissan Vehicle Key

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching