Parts Needed to Tow Trailer with 2000 Toyota Sienna V6
Question:
What does the tow packageinch include? Can it be added on?
asked by: Doug K
Expert Reply:
An official tow package is something that can only be added on by the manufacturer of a vehicle. It can include a trailer hitch, wiring, possibly a transmission cooler, better brakes, lower gearing etc.
For your 2000 Toyota Sienna we can help with some of that, but it wouldn't be an official Toyota towing package.
For a trailer hitch you'd then want the Curt part # C13511 which is confirmed as a fit and would a great option with plenty of towing capacity. For trailer wiring you'd then want the part # C55418.
For a transmission cooler the Derale part # D13503 would be a great option that would work well. Keeping the transmission as cool as possible is the key to prolonging the life of it.
Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
Products Referenced in This Question
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Mid-Size Truck
- SUV
- Van
- Standard Mount
- 11W x 8-3/4T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How Much Does a Boat and Trailer Weigh?
- Q&A: Can Replacement Trailer Tires Be Filled With Foam
- Q&A: Will Bruno Model ASL-250 Powered Lift For Motorized Scooter Work With 2013 Scion xD?
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: 2006 E-450 Super Duty Shuttle Bus Trailer Hitch Receiver
- Q&A: Will The Draw Tite # 75120 Clear Spare Tire On 2003 Toyota Sienna
- Q&A: How to Select Trailer Tires with Correct Load Range Rating for Trailer Gross Weight
- Q&A: Is Drilling Required to Install Draw-Tite Trailer Hitch # 75120 on a 2001 Toyota Sienna
- Article: Trailer Hitch Receiver Sizes
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Measure for Trailer Hitch Drop
- Article: Routing the Power Wire for a Trailer Wiring Harness