Grease Seal Recommendation for Dimensions 1.375 ID and 1.983 OD
Question:
Looking for a replacement seal...mine reads 1.375 ID 1.983 OD 0.313 Thickness Thx
asked by: Joe E
0
Expert Reply:
The grease seal you need is the part # 13194 which has an inner diameter of 1.372 inch and an outer diameter of 1.983 inch.
expert reply by:
Jameson C
0
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.4 Inch I.D.
- 1.983 Inch O.D.
- Redline
more information >
Product Page this Question was Asked From
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Continue Researching
- Shop: Grease Seal
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Q&A: Is There a Grease Seal 13194
- Article: Most Popular Wheel Bearings
- Q&A: Timken Replacement Bearing Solution for Setup with Part Numbers L44649 471750 L44610
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Trailer Hub Seal for TCM 12194TC
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Grease Seal for GS-1250DL
- Q&A: Recommended Complete Flat Towing Setup for a 2021 Chevrolet Blazer
- Q&A: Replacement Trailer Hub for the TDE 46205 with Galvanized Finish
- Article: Trailer Tire Sizing
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Article: How to Raise Your Travel Trailer Height