What Changes Need to be Made After Installing Over Under Axle Kit on Trailer
Question:
Thinking of increasing ground clearance on our 25 foot double axle travel trailer. I would take it to a dealer to have this done, but I would like to know if there are any handling issues after doing this conversion? I realize the weight distribution hitch will need to be re-calibrated, and the ride height will be increased by 3 inches, but are there any issues I need to be concerned with like higher COG, etc. or am I just thinking too much? Thanks in advance.
asked by: Patrick H
Expert Reply:
Over under kits like the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 that you referenced will raise the center of gravity for the trailer. In theory that could cause a potential ride issue but we've yet to hear from a customer who installed a kit like this and had issues. Most likely you'd only need to move the head of your weight distribution system up two holes so that it sits higher and you'd be set.
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Leaf Spring Suspension
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Raise Your Travel Trailer Height
- Article: Trailer Tire Sizing
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: Slipper Spring Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Dimensions for the MORryde ALLTREK 4000 Suspension Kit
- Q&A: Breaking In Replacement 6,000 lbs Leaf Springs
- Q&A: Recommended Lift Kit for 2021 Forest River Gray Wolf Travel Trailer
- Q&A: Can 3,500 lb Axle Trailer Leaf Spring 25-1/4 inch get Replaced with 5k Rated Spring
- Article: Trailer Wiring Diagrams
- Q&A: What Leaf Spring Width SHould be Used with Dexter Over Under Kit # K71-384-00
- Q&A: How to Increase Trailer Ground Clearance Using an Axle Over-Under Kit
- Q&A: Would Dexter 3,500 lb Axle Made in 1999 Use Same Hubs as Current