A Torque Wrench is Required to Tighten Bolts on a Draw-Tite Trailer Hitch for a 2011 Dodge Caliber
Question:
I have a 2011 Dodge Caliber and would like to purchase the Draw-Tite Trailer Hitch 24769 and install it myself.I want to haul bikes. I have a question on how to tighten the bolts yourself. It says You want to check with the directions to verify the specified torque rating for each individual bolt.inch The rating is 100. I do not own a torque wrench so how do I tighten it so all is safe when I put the real weight on the hitch. Can I use a socket wrench?? Safety is always a first with me. I do not want to damage anything by not having enough information as to what is a must to have it done right, Any help with this question.
asked by: Sharon
Expert Reply:
If you do not have a torque wrench you will need to get one or borrow one. Many auto parts stores will loan out tools. I needed a tap and die set and was able to borrow one from a local auto parts chain. You will want to follow the torque specs as specified in the instructions which I have linked for reference. I have also included a link to a video showing a typical installation.
You can use a socket wrench for initial tightening of the bolts, but to get them to the correct torque specs, you must have a torque wrench. There is no other way to make sure you get the bolts tightened correctly. If the bolts are too loose the hitch will not be properly supported on the vehicle frame. Too tight and you can damage the hitch and vehicle frame.
Since you want to carry bikes with the hitch, you should know that on a Class I trailer hitch like this one, you are limited to carrying 2 bikes. You will want to make sure that the bike rack you choose is rated for use on a Class I trailer hitch. The reason you are limited to 2 bikes is because more than 2 bikes puts too much weight too far from the trailer hitch and it cannot handle the torque.
For a bike rack, I recommend the Swagman Trailhead, # S63360. This bike rack will fit a Class I hitch, has anti-sway cradles, and can tilt down for greater access to the rear of the vehicle. I have included a link to the installation details for you.
Products Referenced in This Question
Swagman Trailhead Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Tilting
- Hitch Bike Racks
- Hanging Rack
- Folding Rack
- Tilt-Away Rack
- Frame Mount
- Locks Not Included
- 2 Bikes
- Class 1
- Class 2
- Class 3
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Swagman
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Light 1-Bike Rack For Specialized Como SL 5.0 Bike
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Will the Kuat Transfer V2 Bike Rack item # KU64FR Fit a 1-1/4 Inch Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Why Can the Kuat Transfer V2 Carry a Heavier Bike Than the V1
- Q&A: How to Determine Which Drawbar I Need For My Vehicle
- Q&A: What Ball Mount For Draw-Tite Class I Trailer Hitch Receiver, # 24769, on 2007 Dodge Caliber
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: Trailer Hitch Receiver Sizes
- Q&A: Rack For 2021 Rad Power Bike Radwagon And RadPower Utility bikes
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Best Bike Racks for Electric Bikes
- Article: What Do I Need To Tow A Trailer?
- Article: How to Choose a Bike Rack for an SUV or Crossover