Ball Mount With 10" Drop for Tow Dolly
Question:
We have a Fleetwood Bounder 36’. We bought a madter Tow Dolly to pull my Volvo on. It is 30” from ground to hitch. We need at least a 2” 10-12” drop receiving hitch to work behindvour bounderz would you have anything like this. Thank you
asked by: Paula
Expert Reply:
I believe you are asking about a ball mount with a 10" drop and I recommend checking out the Convert-A-Ball Ball Mount for 2" Hitches # AMSC10. This ball mount fits 2" receivers, has a maximum 10" drop and a weight capacity of 8,000 lbs.
You will need Pin and Clip # PC3, and for a 2" hitch ball you will need # 40038; if you needed a 2-5/16" hitch ball the correct part is # C40007.
Products Referenced in This Question
2" Hitch Ball - 1" Diameter x 2-1/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/4 Inch Shank Length
- 1 Inch Diameter Shank
- 12000 lbs GTW
- Class III
- CURT
more information >
Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 10 Inch
- Rise - 9 Inch
- Fits 2 Inch Hitch
- 8000 lbs GTW
- Class IV
- Shock Absorbing
- Convert-A-Ball
more information >
2-5/16" Hitch Ball - 1" Diameter x 2-1/4" Long Shank - Chrome - 10,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-1/4 Inch Shank Length
- 1 Inch Diameter Shank
- 10000 lbs GTW
- Class III
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Trailer Hitch Ball Mount 10" Drop, 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 10 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Brophy
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Can the JR Products Duplex Receptacle Be Mounted Horizontally
- Q&A: Replacement Light Bar Strip 2016 Northwood Artic Fox Camper w/ Mounting Holes 10-1/8" on Center
- Q&A: Gen-Y Shock Absorbing Ball Mount Orientation and Compatibility
- Q&A: Recommended Ball Mount for Use w/ a Trailer that has a Lunette Ring
- Article: RV Roof Types: What Type of Roof Does My RV Have?
- Q&A: Will 18 Long Equal-i-zer Weight Distribution Shank Affect Trailer Hitch Weight Rating
- Article: How to Carry Bikes While Towing a Travel Trailer
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Recommended Roof Rack for Little Guy Silver Shadow Tear Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: The 5 Best Trailer Drop Hitches You Can Buy