Wiring of Pollak Metal 7-Pole, RV-Style Trailer Socket
Question:
We have green, yellow, brown, red, black and blue wires. Which color would/should be ground wire?
asked by: Lora L
0
Expert Reply:
None of those are the ground wire on the Pollak Metal 7-Pole, RV-Style Trailer Socket # PK12703, it will be the white wire.
Here are the wiring color configurations for this socket:
White - Ground - 10 gauge
Blue - Electric Brake - 12 gauge
Green - Tail, License and Running Lights - 14 gauge
Black - Battery Charge - 10 gauge
Red - Stop and Left-Hand Turn Signal - 14 gauge
Brown - Stop and Right-Hand Turn Signal - 14 gauge
Yellow - Auxiliary Circuit - 14 gauge
expert reply by:
Kyle S
0
Product Page this Question was Asked From
Pollak Metal 7-Pole, RV-Style Trailer Socket - Vehicle End
- Trailer Wiring
- Trailer Connectors
- Vehicle End Connector
- Plug Only
- 7 Round - Blade
- Pollak
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Do 8k Oil Bath End Caps On Lippert Axle Interchange With Dexter End Caps
- Q&A: Recommended Electric Over Hydraulic Brake Set Up for 2016 Montana 3710FL 5th Wheel
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Q&A: Is Adapter Needed to Install Dometic Water Heater # DMC74FR In Place of Atwood
- Article: Brake Controller Installation: Starting from Scratch
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Recommendation for Installation of a Brake Mounting Flange on a Trailer Spindle and Axle
- Q&A: Leaf Spring Recommendation for 4,400 lb Trailer Axle
- Q&A: Recommended Wet Bolt and 2-1/4" Shackle Strap Kit for Tandem Axle Trailer
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Hitch Adapters and Extenders
- Article: Troubleshooting Brake Controller Installations
- Article: Trailer Hitch Receiver Sizes