Wheel Lug Nut fir a 2005 24’ Haulmark Cargo Trailer with 15 inch 6 Bolt Wheels

Question

Question:

What size wheel lug is used for a 2005 24’ Haulmark Cargo trailer? Twin axle with 6 bolt 15” wheels. Thank you

asked by: Bob

0

Expert Reply:

For 15 inch trailer wheels with a 6 bolt pattern you are looking at 1/2"-20 lug nuts such as # CE11051 for a standard lug nut with 60 degree cone. If you have aluminum wheels then you will likely need a longer nut such as # 12CLN-L.

expert reply by: Michael H

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

A 5 on 4-1/2" bolt pattern on a trailer wheel will use a 1/2" bolt with a 60-degree cone. I have linked our selection of bolts that meets this criteria for you to filter through. One of the most popular is the CE Smith Trailer Wheel…

view full answer...

Answer 3

To find the right replacement hub for a trailer you will need the inner and outer bearing numbers stamped into the sides of the bearings or the measurements of the spindle to 3 decimal places. The measurements have to be as accurate as possible so…

view full answer...

Answer 4

Yes, the DeeMaxx Trailer Wheel Lug Nut #DE65GR is strong enough to be used with an RV that has axles with a higher weight capacity.

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…

view full answer...

Answer 6

What you have there is a car tire. The P in front of the tire size indicates that this type of tire is used for passenger vehicles. You do not want to use car tires on a trailer. This is because trailer tires are built with a thicker sidewall…

view full answer...

Answer 7

Trailer wheel lug nuts that are 1/2-inch inside diameter typically have a 20-TPI thread pitch (20 threads per inch). Most lug nuts also use a 60-degree-coned profile like #CE11051, but a 90-degree like #STN569 is also available for 9/16-inch studs.…

view full answer...

Answer 8

You're correct. A 6 on 5-1/2 inch bolt pattern will have 6 lugs with a 5-1/2 inch bolt circle. That means that if you measure from the center of one bolt across the hub to center of the opposite bolt, that distance will be 5-1/2 inches. I'll…

view full answer...

Answer 9

There are some 7-Way connectors/sockets that have blades that are a little larger than others and can cause this issue. Sometimes you can force the trailer end in but I recommend replacing the connector on your RV with a new one such as #PK11893 if…

view full answer...

Answer 10

The 2019 Continental Cargo Trailers use 1/2"-20 lug nuts, part #CE11051.

view full answer...

Answer 11

We have many different kinds of 1/2" lug nuts; part #CE11051 for the open style, part #LHLR103 for acorn short, or part #AM90049 for acorn long. The open style are for steel wheels and the acorn style are for aluminum wheels. The longer ones are…

view full answer...

Wheel Lug Nut fir a 2005 24’ Haulmark Cargo Trailer with 15 inch 6 Bolt Wheels

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching