Is Wheel Alignment Needed After Installing Coil SumoSprings Helper Springs on 2017 Subaru Outback

Question

Question:

After installing the sumo springs is it recommended to get an alignment done?

asked by: Andrew

0

Expert Reply:

The SumoSprings Custom Helper Springs # CSS-1125R referenced in your question are confirmed to fit your 2017 Subaru Outback Wagon. A wheel alignment is not needed as a result of installing this kit. The wedge-shaped springs will simply fit between the individual coils of your existing springs for additional support and cushion.

I have attached the written installation instructions that you can also take a look at.

expert reply by: Chris R

0

Answer 1

The install of a SumoSprings Kit like the part #SSF-106-47 does not require getting an alignment on the vehicle.

view full answer...

Answer 2

I may have a solution for you to add a suspension enhancement to the rear axle of your 2019 Kia Sorento, but there are not any Sumo Springs parts that will fit. However, you can use the Air Lift 1000 Air Helper Springs for Coil Springs - Rear…

view full answer...

Answer 3

If you can provide me with some measurements of your coil springs, I can determine if any of our SuperSprings Coil Inserts will work on your 2009 Subaru Legacy. Unfortunately SuperSprings has not tested any of their coil inserts with your vehicle,…

view full answer...

Answer 4

That is a good question; the addition of suspension enhancement such as the Coil SumoSprings Custom Helper Springs #CSS-1125R that fit your 2015 Subaru Outback do not increase your tongue weight capacity or towing capacity. There are no products…

view full answer...

Answer 5

The Coil SumoSprings Custom Helper Springs part #CSS-1125R are the perfect option for a 2004 Honda CR-V. They are super easy to install (no tools required) and will do a great job of helping transfer weight from the rear to the front axle which will…

view full answer...

Answer 6

Yes, the SumoSprings part #CSS-1125R that you referenced are a confirmed fit for your 2016 Subaru Outback Wagon and would eliminate the sag you are experiencing when towing as that's exactly what they are designed to do.

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

A 4-way trailer connector will have four functions which means it will also have four wires for the exception of wishbone harnesses. These four functions are ground, tail light, right turn, and left turn. The ground function will usually be…

view full answer...

Is Wheel Alignment Needed After Installing Coil SumoSprings Helper Springs on 2017 Subaru Outback

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching