Can Weight Distribution System Be Used Without Spring Bars
Question:
I have a 2014 ram with 6inch lift so I need a distribution shank. I see those on your site. My distribution system is a curt 17500. My question is do you sell a 2inch ball mount that will also fit the shank? In other words when I take off the 17500 system, is there a bolt on 2inch ball system I can put on for other lighter trailers that is a direct bolt on for the shank from curt? I hate to buy 2 systems. Thanks so much.
asked by: Thomas H
Expert Reply:
The 2-inch shank parts of weight distribution systems like the Curt TruTrack # C17500 are standardized so you can replace any shank with another from any brand to give you the amount of drop you need to keep the hitched trailer level. All 2-inch shanks appear on the page I linked for you. Among these is the Curt shank # C17125 which offers drop up to 15-3/4-inches with trunnion bars like those in the TruTrack # C17500.
When you tow a lighter trailer that does not need the weight distribution hitch all you need to do is remove the two spring bars and you can use the rest of the setup for standard towing.
Products Referenced in This Question
Curt Weight Distribution Shank - 12" Long - 15-3/4" or 16-1/4" Drop - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2 Inch Hitch
- Round - 16 Inch Drop
- Trunnion - 15 Inch Drop
- CURT
more information >
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 900 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight
- Q&A: What 2" Hitch Ball Will Fit The Curt TruTrack 2P Trailer Mounted Weight Distribution System # C67ZV?
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Which Mirror Monitor Will Work With The Rear View Safety Backup Camera System # RVS-770613-213?
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Boat Trailer Seal for a NOK AD2527E Grease Seal
- Q&A: Weight Distribution Solution for Trailer that Has Angle Iron Frame Design
- Q&A: Replacement 7-Way for Trailer Wiring
- Q&A: What Style of 7-Way Plug Does the Electric Jack w/ Footplate and 7-Way Plug Use
- Q&A: Timbren Suspension Enhancement Options For A 2023 Toyota Tundra TRD PRO