Replacement Landing Gear Legs for a 2002 Fleetwood Terry 5th Wheel Trailer
Question:
2002 fleetwood terry fifth wheel 30 foot I need to replace the electric landing gear and need your recomendations. been looking at ultra fab model 17943010 and my landing gear measures 33 1/2 on the outer section. spacing on the tabs are 18 5/8 from top to the bottom and bottom of the first tab is 8 5/8 from the bottom. top tab is 25 3/4 from bottom to bottom of top tab. do you have something that will work?
asked by: Wally
Expert Reply:
How are you measuring the weld stops on the landing gear legs, inside to inside A), outside to outside B), or center to center? If the outer tube C) on your existing landing gear leg measures 33-1/2" long then the inside to inside measurement should be 19-1/2" and the outside to outside measurement should be 21-1/2". If this is the case then you will want to use the Stromberg Carlson Electric Landing Gear Set part # LG-4.
If your weld stops do not match the above then it is not a common landing gear set so the frame brackets would need to be repositioned for which the best option would then be to use the Ultra-Fab Deluxe Electric Landing Gear Set part # UF17-943010 as it comes with new brackets that can be welded to the frame that is needed in order for these legs to work on your trailer.
Products Referenced in This Question
Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Steel
- 6001 - 7000 lbs
- Electric Jack
- Landing Gear
- 35 Inch Lift
- Weld-On
- 2 Jacks
- Stromberg Carlson
more information >
Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Steel
- 10001 lbs or More
- Electric Jack
- Landing Gear
- 38 Inch Lift
- Weld-On
- 2 Jacks
- Ultra-Fab Products
more information >
Product Page this Question was Asked From
Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2"
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Legs
- Driver Leg
- Stromberg Carlson
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacment Landing Gear Leg for Atwood Landing Gear
- Q&A: Replacement Leg for Lippert Ground Control 2.0 LC241846
- Q&A: Are Replacement Parts for Atwood Landing Gear Available or Will Another Brand Fit
- Article: Trailer Tire Sizing
- Q&A: Replacement 14,000 lb. Hydraulic Jack Assembly for Lippert Level Up Systems
- Q&A: How to Measure to Pick Out Replacement Landing Gear for a Trailer
- Q&A: Replacement Power Distribution Panel for Iota IDP-240
- Q&A: Replacement Lead Landing Gear Leg for a 2008 Carriage Cameo 5th Wheel Trailer
- Article: How to Choose a Bike Rack for a Motor Home or RV
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: Stability Control for Heavy Duty Vehicles
- Article: What Exactly is Tongue Weight?