Recommended Trailer Hitch Receiver and Trailer Wiring Harness for 2012 Ford Focus SE
Question:
Hi can tell me what trailer hitch and wiring harness I will need for my 2012 ford focus SE Thank you
asked by: Jamie
Expert Reply:
For your 2012 Ford Focus SE, I recommend the Curt Trailer Hitch Receiver - Class I - 1-1/4" # C11158. This is a custom fit for both the sedan and hatchback as they install the same way and I've attached a video to assist. This is a no drill installation, but the heat shield underneath will need to be trimmed for fit.
For your wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118548. This will install behind your tail lights to the factory wiring harness with the quick connectors. You will then run that power wire to your vehicle battery, and I've attached an article to assist with that cable routing.
If you will be towing, I then recommend the Draw-Tite ball mount # 3593 which comes with a pin and clip. You then will add a hitch ball like # 19256 for a 1-7/8 inch diameter or # 19258 for a 2 inch diameter to match your trailer coupler.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Q&A: Replacement Power Wire Parts for Tekonsha Wiring Kit on a 2018 Ford Focus
- Article: Flat Towing Package for 2016-2018 Ford Focus
- Q&A: Trailer Hitch and Wiring Recommendation for 2018 Ford Focus ST Hatchback
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Q&A: Plug and Play Tow Bar Wiring Harness for a 2012 Ford Focus SE Hatchback
- Q&A: Which is Better Roadmaster or Blue Ox Tow Bar
- Q&A: Ground Clearance When Installing Curt C11158 Trailer Hitch on 2018 Ford Focus
- Q&A: Selecting Ball Mount for Yakima Trailer with 22" Coupler Height and Ford Focus with 10" Hitch Height
- Article: Which Hitches are Made in the USA
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: How to Measure for Trailer Hitch Drop