Front Mount Hitch Options for a Winch on a 2018 Ford F-150
Question:
2018 F150 supercab STX XL w/STX PKG with FX4 pkg, 2.7 ecoboost which curt and drawtite hitch model numbers for a front end hitch will fit? 2 inch receiver. Purpose is to use a winch on the front. I would like to have the most ground clearance. What is the dimension from the bottom of the frame to the bottom of the receiver on each brand? thanks,
asked by: Randy D
Helpful Expert Reply:
The front mount hitch receivers from Curt and Draw-Tite that fit your 2018 Ford F-150 are parts # C31083 and # 65067 respectively. Both of these are rated for 9,000 lbs line pull and 500 lbs vertical load.
From the 2 bolts holes on the Curt to the top of the receiver tube measures just under 7-1/2" while that same distance on the Draw-Tite is closer to 7". The Draw-Tite will give you more ground clearance but not by much. Instructions for both receivers have been linked for you to reference.
If you don't already have a winch then I recommend the ComeUp Seal Gen2 Integrated Off-Road Winch # CU295885. This comes with a wireless remote, synthetic rope, a hawse fairlead, and is rated for 9.5K so you can get the max out of your front hitch receiver. You can mount this on your F-150 using the Curt # C31010 mounting plate. To add handles on this plate use part # C31005 to make removal much easier.
You may also be interested in the ComeUp Battery Isolation Switch # CU881097 to disable the winch for when you will be away from your pickup for extended periods of time.
Products Referenced in This Question
Curt Trailer Hitch Winch Mount Handles
- Accessories and Parts
- Electric Winch
- Handles
- Mount Handles
- CURT
more information >
Curt Trailer Hitch Electric Winch Mount Plate
- Accessories and Parts
- Electric Winch
- Mounting Hardware
- Plates
- Without Handle
- CURT
more information >
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Front Receiver Hitch
- Custom Fit Hitch
- Front Mount Hitch
- 500 lbs Vert Load
- 9000 lbs Line Pull
- 2 Inch Hitch
- Square Tube
- CURT
more information >
ComeUp Battery Isolation Switch for DV and Seal Series Winches
- Accessories and Parts
- Electric Winch
- Switches
- ComeUp
more information >
Product Page this Question was Asked From
Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Front Receiver Hitch
- Custom Fit Hitch
- Front Mount Hitch
- 500 lbs Vert Load
- 9000 lbs Line Pull
- 2 Inch Hitch
- Square Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Front Mount Hitch
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Superwinch SX10SR Integrated Off-Road Winch - Synthetic Rope - 10,000 lbs
- Shop: Curt Trailer Hitch Electric Winch Mount Plate
- Q&A: Recommended Front Mount Hitch and Scooter Carrier for a 2019 Ford F-150
- Shop: Curt Trailer Hitch Winch Mount Handles
- Shop: Suspension Enhancement
- Video: Curt Trailer Hitch Electric Winch Mount Plate Installation - 2003 Ford F-250
- Shop: Vehicle Cargo Control
- Shop: Vehicle Snow Plows
- Shop: Bulldog Winch Booster Cable Set - Quick Connect to Clamp - 2 Gauge - 20' Long
- Shop: Front Mount Trailer Hitch Receiver Skid Shield - 2" Hitch
- Shop: Bulldog Winch 3/4" Shackle for 1-1/4" Hitches
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Can A Camera Be Added To A Trailer Being Towed By RV and Displayed On Existing RV Monitor?
- Search Results: superwinch
- Search Results: winch rope
- Q&A: Front Mount Receiver for a 2018 Ford F-150 XLT with Sport and FX4 Packages
- Q&A: What is the Distance From the Cross Tube to the End of the Receiver on the Curt C31083
- Q&A: Front Hitch for 2018 Ford F-150 Lariat Super Crew Lariat FX4
- Q&A: Curt or Draw-Tite Front Mount Hitch for 2018 Ford F-150
- Q&A: Will a Front Mount Hitch Interfere with the Adaptive Cruise Control on a 2015 GMC Yukon XL Denali
- Video: Curt Electric Winch C31010 Review
- Search Results: battery wiring