Disc Brakes for Timbren Axle-Less Suspension
Question:
Two questions concerning your Timbren Axle-Less Suspension - Spindle Only - Regular Tires - 5200 lbs. 1: What disc brake assemblies would be compatible with this unit. 2: In the write-up both 2x2 and 2x3 steel tubes are noted to connect and reinforce the suspension pieces. Which is correct? Thanks.
asked by: Ray U
Expert Reply:
To answer your first question, the Timbren Axle-Less Suspension # ASR5200S01 you referenced is compatible with disc brakes that use a 5-bolt mounting flange, the Kodiak Disc Brake Kit # K2HR526D.
This is a hub and rotor kit; you will also need Bearing Kit # BK3-100, which has the correct bearings, races, and grease seal for the hub on this brake kit.
In regards to your second question, I took a look at the installation manual for the Timbren # ASR5200S01 and it specifies using 2" x 3" steel tubing, as you can see in the cut out of the manual I added for you.
Products Referenced in This Question
Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 15123 and 25580
- Race 25520 and 15245
- 6000 lbs Axle
- etrailer
more information >
Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 5200 lbs
- 6000 lbs
- Brake Assembly
- 6 on 5-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 5,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- 5200 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 5 Bolt Flange - 5,200 lbs
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Lift - 5 Bolt Flange - 3,500 lbs
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Shop: Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Search Results: 8~201~5uc3~ez
- Search Results: tasr5200s03
- Search Results: 8~213~5uc1~ez
- Video: EZ Connector Wiring - Trailer Connectors - 319-R7-01 Review
- Q&A: Hub and Drum Compatibility For Timbren Axle-less Suspension 5200-lbs
- Q&A: How to Release Trailer Brakes After Trailer Break Away Pin Pulls Out
- Article: Testing Trailer Brake Magnets for Proper Function
- Search Results: timbren
- Video: Timbren Trailer Axles - Rubber Spring Suspension - TASR5200S03 Review
- Shop: Vehicle Tow Bar Wiring
- Shop: Brake Controller
- Shop: Trailer Wiring
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Air Lift Helper Springs for Coil Springs on Ram 1500 Truck
- Q&A: Will the MaxxTow 30x50 Wheelchair Carrier w/ Ramp Fit My 2021 Subaru Ascent with a Factory Hitch?
- Q&A: Snap Pads For 2018 Newmar Bay Star
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: Can 3,500 lb Axle of Trailer Be Upgraded to 5,200 lb Axle
- Q&A: Replacing Axles on a 2021 Apex Nano Dual Axle Trailer With a Timbren Silent Ride or Axle-Less System
- Video: Review of etrailer 6 Leaf Double Eye Spring - e94SR
- Search Results: shocks
- Search Results: disc brakes
- Search Results: disk brake