Kayak Carrier Recommendation for TracRac Ladder Rack

Question

Question:

Looking for a j cradle style to fit a trac rac pro 2

asked by: Diana

0

Expert Reply:

The Malone foam block style kayak carrier part # MPG159 that you referenced is the only style of kayak carrier we offer that will fit the wider crossbars of the TracRac ladder racks.

expert reply by: Jameson C

0

Answer 1

The best way to carry kayaks on a TracRac ladder rack is using the Rhino Rack Nautic 580 Side Loading Kayak Carrier #RR580 which fits in the top channel of a TracRac SR ladder rack like what you have. The foam block solution part #MPG159 also fits…

view full answer...

Answer 2

There is a solution which is going to help save your kayaks from any further damage. To mount them on your TracRac TA27000-01 I recommend using the Malone Foam Kayak Block #MPG159. These are going to fit directly over the four-inch bars on your…

view full answer...

Answer 3

The Rhino-Rack Crossbar Pads for Vortex Aero Crossbars #RWP01 was intended to fit the Rhino Rack Vortex crossbars which measure 3-1/8 inches wide and 1-3/16 inches tall. If you have bars that are these dimensions this rack will fit well, but in…

view full answer...

Answer 4

We have a foam block style of boat carrier that has a large enough hole for the thicker TracRac bars with the part #MPG159. This would be our best solution to protect the finish of your bars as well as securely carry your boat. See attached picture…

view full answer...

Answer 5

In order for the Yakima SweetRoll Kayak Carrier w/ Tie-Downs - Saddle Style - Rear Loading Item #Y04074 to fit, the crossbars you are securing them to must be no wider than 3-1/2" and no taller than 1-11/16". The Thule TracRac #TH27000XT…

view full answer...

Answer 6

The 65" long crossbar you are referring to wouldn't happen to be the ones on the Thule TracRac TracONE Ladder Rack part #TH37005XT would it? If so these crossbars are a bit larger (4" wide x 1-1/2" tall) than a standard aero…

view full answer...

Answer 7

The crossbars on the Erickson Truck Bed Ladder Rack #EM07705 measure 3-1/4 inches wide and at the tallest part of the crossbar they are 1-1/4 inches tall. These crossbars are more of a triangle shape so the peak in the middle as you can see in the…

view full answer...

Answer 8

I do have a solution for you, however I spoke with my contact at Thule (who manufactures the TracRac systems) and he stated that J-Style Kayak carriers are not compatible with the TracOne Truck Bed Ladder Rack #TA27000B that you referenced in your…

view full answer...

Answer 9

I definitely have some options to fit with the RetraxPRO XR Hard Tonneau Cover #RTT-80383 on your 2022 Ford F-250 Super Duty with the short bed. For an adjustable ladder rack that fits directly into the rails on the tonneau I recommend the Yakima…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Kayak Carrier Recommendation for TracRac Ladder Rack

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching