Recommended Curt Ball Mount without Hitch Ball with 4 Inch Drop and 7,500 Pound Capacity
Question:
i need this exact item without the ball, do you sell it?
asked by: Chad R
Expert Reply:
The Curt Class III Ball Mount # C45042 referenced in your question includes a pre-torqued 2-5/16 inch hitch ball. This exact ball mount is not available from the manufacturer without the hitch ball, but I do have an option that should work well.
I recommend taking a look at the Curt Ball Mount # C45154. This 2 inch ball mount features a drop of 3-3/4 inches or a rise of 2-1/2 inches. It features the same 7,500 pound towing capacity as the Curt unit you were looking at but also has a nice angled shank that allows for easier installation into the hitch receiver. It is compatible with hitch balls that have a 1 inch diameter shank. This is the closest option we have available to the ball mount you mentioned.
I have attached a short video demonstration on this ball mount that you can also check out.
Products Referenced in This Question
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 4" Drop - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Product Page this Question was Asked From
Curt Class III Ball Mount with 2-5/16" Ball - 2" Rise or 4" Drop - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2-5/16 Inch Ball
- One Ball
- Steel Shank - Gloss Black
- Rise - 2 Inch
- Drop - 4 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Ball Mount Kit
- CURT
more information >
Continue Researching
- Shop: Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 4" Drop - 7,500 lbs
- Video: Curt Ball Mounts - Fixed Ball Mount - C45154 Review
- Search Results: rv drinking water hoses
- Shop: Camco Premium RV Drinking Water Hose - 5/8" Inner Diameter - 25' Long
- Video: Camco Premium RV Fresh Water Hose Manufacturer Review
- Video: Camco RV Fresh Water - Hoses - CAM22833 Review
- Video: Review of Curt Ball Mounts - Fixed Ball Mount - C45056
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Shop: Replacement Handle Rod for etrailer and Ram Stabilizer Jacks - 650 lbs
- Shop: Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on 4-1/2 - White
- Q&A: How to Pick Out Ball Mount for 2020 Toyota Tacoma
- Video: Curt Fusion Ball Mount Review
- Shop: Stabilizer Jacks - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 2
- Video: etrailer Stabilizer Jacks Review
- Video: etrailer Stabilizer Jack Review
- Shop: Dexstar Conventional Steel Wheel with Offset - 13" x 4-1/2" Rim - 5 on 4-1/2 - Black
- Q&A: Can the Dexstar Conventional Steel Wheel Be Used On a Vehicle
- Q&A: Availability of 13" Diameter Offset Wheels with a 5 on 4-1/2 Inch Bolt Pattern
- Q&A: Do you Carry a 195/75R14 Trailer Tire Mounted On a 5 Lug Wheel?
- Shop: Fulton Fas-Lok Coupler, 2" Ball, 3" Channel - 5,000 lbs
- Q&A: Comparing The Curt C45056 And C45154 Ball Mounts
- Shop: BOLT brand vehicle and hitch locks
- Search Results: rubber grip
- Search Results: fulton f2
- Search Results: karavan trailer parts
- Search Results: handle grip
- Search Results: fulton f2 winch
- Search Results: 2" ball
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Replacement Grease Seal for Transcom TCM22333TBN