Will the Dexstar Conventional Steel Wheel Part # AM20766 Work with a Tire Tube

Question

Question:

Will the Dexstar # AM20766 accept a tube required with the various tube type wide white wall bias ply tires?

asked by: Craig

0

Expert Reply:

I spoke with my contact at Dexstar and they informed me that you should have no trouble using the Dexstar Conventional Steel Wheel part # AM20766 with a tire tube. This wheel has a black powder coated finish for rust resistance and is made of a high quality steel right here in the U.S.A. It is 16" diameter x 6" wide and has a 8 on 6-1/2" bolt pattern.

I have attached a review video on the above wheel for you as well.

expert reply by: Conner L

0

Answer 1

You can measure the diameter of the wheel and the diameter of the baby moon mounting ridge on the wheel if you care to (see photo), but because the Dexstar Conventional Steel Wheel you have is a standard automotive size, you can simply purchase…

view full answer...

Answer 2

Do you see the three raised bumps on the center circle section of your wheel? That's where a baby moon like the part #AM90086 fits over. You need to measure that diameter. If it's right at 9-1/4 inch this cover is what you'd need.

view full answer...

Answer 3

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 6

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 7

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Will the Dexstar Conventional Steel Wheel Part # AM20766 Work with a Tire Tube

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching