Base Plate Kit Needed to Flat Tow a 2002 Jeep Liberty with a Curt Tow Bar
Question:
I have a 2002 Jeep Liberty 4x4 Limited Edition that I would like to tow behind my motorhome. A relative has offered to give me a Curt T-745 universal tow bar, which is a ball hitch tow bar. It has a 5,000 lb towing capacity, which is sufficient for my vehicle. Is there a compatible base plate and wiring harness for this set-up, as well as any quick disconnect attachments I would need? Also, I have a brake assist system I can use. Would I also need anti-sway bars for this application? Thank you!
asked by: Maya
Expert Reply:
To use a Curt tow bar, like part # C19745 to flat tow your 2002 Jeep Liberty you will need to install the Blue Ox Base Plate Kit # BX1119 and then use the Adapter Kit # BX8833. The Blue Ox base plate kit has removable arms that help gives your Jeep an OEM look when you aren't flat towing.
If you will be doing a lot of towns then I recommending using the Flexo-Coil Wiring Kit # RM-15267 if your motorhome has a 7-Way or the Hy-Power Diode Wiring Kit # RM-154 if your motorhome has a 4-Way. If you only tow every once in awhile then you you may want to go with Magnetic Lights # TL21RK instead.
Aside from this equipment and your braking system you also need some safety cables like the Coiled Safety Cables # RM-643. It would also be beneficial to ensure that the Curt tow bar is within the proper 3" operating range. Attached is a article showing how to choose a high-low adapter. For your situation you would need a hitch ball with the correct rise or drop.
Be sure to reference your owner's manual for any specific instructions on flat towing as well.
Products Referenced in This Question
Blue Ox Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Blue Ox
more information >
Curt, Reese, Valley, Draw-Tite, and EazLift Tow Bar Adapter Brackets for Blue Ox Base Plates
- Accessories and Parts
- Base Plates
- Tow Bar
- Adapters
- Blue Ox to Draw-Tite
- Blue Ox
more information >
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Pole Flat Connectors
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs
- Safety Cables
- Coiled Cables
- 68 Inch Long
- 6000 lbs GTW
- Snap Hooks
- Coated Cables
- Roadmaster
more information >
Heavy Duty Magnetic Tow Lights - 20' Wiring Harness with 4-Way Flat Trailer Connector
- Tow Bar Wiring
- Bypasses Vehicle Wiring
- Removable Tail Light Kit
- 20 Foot Long Harness
- Universal
- Magnetic Mount
- Optronics
more information >
Product Page this Question was Asked From
Curt Adjustable Tow Bar - Coupler Style for 2" Ball - 5,000 lbs
- Tow Bar
- Coupler Style
- Fixed
- Steel
- 5000 lbs
- Stores Separately
- Standard
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Rear Sway Bar and SumoSpring Kit for 2011 Itasca Cambria to Improve Handling
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Must-Have Flat Towing Components
- Q&A: Blue Ox Acclaim Tow Bar Compatibility With A Blue Ox Baseplate
- Article: Flat Towing Package for 1998-2006 Jeep Wrangler
- Article: How Level Should a Tow Bar Be When Flat Towing
- Article: Flat Towing Package for 2011 Chevrolet HHR
- Q&A: Tow Bar Lighting Solution for 2009 Jeep Patriot
- Article: Wiring a Tow Vehicle to Tow a Dinghy
- Q&A: How to Flat Tow a 2005 Jeep Wrangler TJ Behind a Motorhome
- Q&A: Which is Better Roadmaster or Blue Ox Tow Bar
- Q&A: Does Steering have to be Locked out to Flat Tow a Vehicle Behind a Motor Home
- Q&A: Recommended Flat Towing Solution For 2022 Ford Bronco With Modular Bumper and Winch
- Article: Trailer Wiring Diagrams