Installing Curt Spring Bar Retainer Package # 17109
Question:
How do you fasten the rivets when replacing the subject retainer clips? do you have to have a special tool or can you just pound them in with a hammer?
asked by: Bradley V
Expert Reply:
When installing the included rivets from the Curt Spring Bar Retainer Package # 17109 referenced in your question, you will not need any special tools to insert the new rivet/set key. The new set key (which likely has a slightly different design than the true rivet that is currently used on the system head), will simply set into place when inserted into the hole. You should not even need a hammer to get it seated into position.
When installing the spring clip, you will first put both the rivet/set key and hex head screw into position on the spring. You will then insert the entire unit into the head, making sure both the river/set key and screw are seated correctly. Then you will just need to torque the hex head screw per the included instructions.
The only thing you will likely need for this process is a chisel to remove the head of the old rivet and a pin punch to remove the remaining shank.
Product Page this Question was Asked From
Curt Spring Bar Retainer Package for Round Bar Style Weight Distribution
- Accessories and Parts
- Weight Distribution Hitch
- Hardware
- Rivets
- Spring Bar
- CURT
more information >
Continue Researching
- Shop: Replacement Spring-Bar Release Clip for Fastway e2 Weight Distribution Systems with Round Bars
- Shop: Curt Spring Bar Retainer Package for Round Bar Style Weight Distribution
- Shop: Threaded Sink Basket
- Shop: Threaded Sink Basket
- Shop: Steel Sink Strainer w/ Threaded Basket for 2" Drain
- Video: Review of Fastway - Weight Distribution - FA94-02-1059
- Shop: Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 6K GTW, 600 lbs TW
- Shop: Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Q&A: How to Remove and Reinstall the Retaining Clips on a Curt Round Bar Weight Distribution System
- Q&A: Replacement Retainer Clips for Round Bar Weight Distribution System
- Q&A: Replacement Release Clip Recommendation for Fastway e2 Weight Distribution Round Bars
- Q&A: Replacement Clips for Weight Distribution System
- Q&A: Replacement Spring Bar Retainer Clips for Weight Distribution System
- Q&A: Recommended Round Bar Retainer Clips for Weight Distribution Head
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Video: Choosing the Right Brake Controller
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Fifth Wheel Hitch
- Search Results: 25580
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: Brake Controller
- Search Results: dust caps
on Accessories and Parts
