Parts Needed to Install Prodigy RF Trailer Brake Controller in 2014 Volvo S60

Question:

I have a 2014 Volvo S60. I just purchased a Tekonsha Prodigy RF from you. I need to wire my 7 way connector to a brake control location. Do you know where I can wire into my brake control? Thanks.

asked by: Gary W

Expert Reply:

All brake controllers will require a hard-wired 7-way installation in your 2014 Volvo S60 since the car does not have a quick-connect brake controller port under the dash like many tow vehicles do. The linked page displays all wired controllers.

You will need to use our brake controller installation kit # ETBC7 along with a 4-pole harness # 118770 in order to have the fully-functional 7-way on the car that is required to use the Prodigy RF brake controller # TK94FR.

Once the 7-way is installed on the car the RF plugs into it and the trailer then plugs into the 7-way receptacle on the RF control box that mounts on the trailer frame. The recommended mounting locations for the control box are shown in the linked photo.

expert reply by: Adam R