Install Kit and Wiring to Install Reese Reese Fifth Wheel # RP30051 on 2007 F250 Short Bed
Question:
Besides the hitch with the slider built in, what else will I need for installation in the 07 F-250 Super Duty short bed. Thank you
asked by: Keith
Expert Reply:
Other than the sliding hitch you referenced, part # RP30051, you will need an install kit that includes the rails to attach the hitch to the truck bed and the brackets that attach the rails to the truck frame. There are two different kits that will work with your F250, a universal kit, part # RP30035 and a custom kit, part # RP50082-58. I would recommend the custom kit, as it will cut your install time by 50 percent.
You will also need a trailer connector mounted in the truck bed. Typically, this is installed on the drivers side between the tail gate and the wheel well. Part # PK11893-11932 would plug inline with your existing 7-way and allow you to retain your connector at the rear of the vehicle.
I have provided links to install instructions for both install kits, as well as link to some install videos. The wiring harness install shows the connector being installed on a different vehicle, but the video will give you a good idea of how to proceed with the install.
Products Referenced in This Question
Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole - Ford, GM, Dodge, Nissan w/ Factory Plug
- Custom Fit Vehicle Wiring
- Fifth Wheel and Gooseneck Wiring
- 7-1/2 Feet Long
- Custom Fit
- 7 Round - Blade
- Pollak
more information >
Reese Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt
- Fifth Wheel Installation Kit
- Universal
- Above the Bed
- Reese
more information >
Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches
- Fifth Wheel Installation Kit
- Custom
- Above the Bed
- Reese
more information >
Product Page this Question was Asked From
Reese 5th Wheel Trailer Hitch w/ Square Tube Slider - Dual Jaw - 16,000 lbs
- Fifth Wheel Hitch
- Sliding Fifth Wheel
- Above Bed Rails
- 4000 lbs Vertical Load
- 16000 lbs GTW
- Double Pivot
- Standard - Double Jaw
- 15 - 18 Inch Tall
- 10 Inch Fore/Aft Travel
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Q&A: How to Determine Correct Height Setting for 5th Wheel Hitch
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Gooseneck to 5th Wheel Adapters
- Article: How Much Solar Power Do I Need For My RV?
- Article: 5th Wheel Hitch Installation | The Ultimate DIY Guide
- Article: Ram Trailer Tow Prep Package
- Article: Sidewinder with Rotating Turret for Short Bed Pickups
- Q&A: How to Determine Fifth Wheel Hitch Height Setting Needed
- Q&A: Parts Needed For Flat Towing a 2024 Ford Maverick Behind a 2010 Winnebago Journey With Air Brakes
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Q&A: 2019 Ram 2500 OEM Puck System Adapter for RBW Lil' Rocker 5th Wheel Hitch
- Q&A: 5th Wheel Hitch With Maximum Height for Most Trailer-to-Truck Bed Rail Clearance
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It