Diameter of Bolt for Strap of Erickson Roller Idler for E-Track # EM09144

Question

Question:

What is the bolt diameter that goes through the etrack clip?

asked by: Tom M

0

Expert Reply:

The diameter of the bolt that the strap attaches to on the Erickson Roller Idler for E-Track # EM09144 is 1/2 inch.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I have attached a dimensional photo of the etrailer E-Track Backing Plates part #e96RR which you can then use to determine compatibility with the Mytee Products e-Track. That said, as we do not carry this product, we cannot confirm fit…

view full answer...

Answer 2

I have a couple options for you as the SmartStraps Ratcheting Wheel Net with Snap Hooks #348851 will not fit your 33" tire. The ProGrip Adjustable Wheel Net with Ratchet and Snap Hooks #317-18900 are designed to fit a tire up to…

view full answer...

Answer 3

Ideally you'd want the anchor points for a wheel net like the SmartStraps #348851 to be in-line with the wheel, but since these are rated for 3,333 lbs (each) and you're using them for a Jeep you'll be perfectly safe to…

view full answer...

Answer 4

The D-Rings can be a little out of line with the tires but you still want them fairly close. If this is the case for your car hauler trailer then you can definitely use something like the ProGrip Adjustable Wheel Net with Ratchet and Snap Hooks…

view full answer...

Answer 5

Erickson E-Track Cargo Control items like #EM59150, #E19148 and #E19146 are not painted but rather they are given a zinc coating treatment to provide corrosion resistance since they are made of steel. These are perfectly suitable for use on the…

view full answer...

Answer 6

Hey Ted, so if you look in the bed of your truck and see 5 holes/pucks that would mean you have the OEM prep. I'd assume if you had it you'd have seen them by now. If you had it you'd only need a ball like the part #C60618. If you…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The Air Lift LoadLifter 7500 XL Air Helper Springs #AL57531 will fit your 2022 Ram 3500 Mega Cab with single rear wheels. This is the extra heavy duty 7,500 lb kit so it is most commonly used on dually trucks, but it will fit single rear wheel models…

view full answer...

Answer 9

Yes, we do! It is Curt Custom Underbed OEM-Style Gooseneck Hitch item #C60633. This gooseneck hitch is confirmed to fit both the 6-1/2' and 8' bed lengths of the new 2024 Ram 2500. It has a massive 35,000 lbs capacity and installs in…

view full answer...

Answer 10

Hey Chris, it sounds like all you'd need to connect the MB Sturgis Propane Extension Hose for Small Appliance #100284-144-MBS to the Camco Automatic Changeover 2-Stage Propane Regulator for Dual Propane Tanks #CAM59005 is the MB Sturgis…

view full answer...

Answer 11

As long as the RBW Lil' Rocker mounts to industry standard base rails you'll need the Curt Adapter Rails #C29BR that fit in the OEM puck system on your 2019 Ram 2500 and give you a standard base rail connection. I'm attaching a photo…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Diameter of Bolt for Strap of Erickson Roller Idler for E-Track # EM09144

Product Page this Question was Asked From

Continue Researching