Measuring Drums to Determine Which Brakes are Needed
Question:
How can I know if my caravan is a 10inch or 12inch? Thanks
asked by: Sue
Helpful Expert Reply:
Take a look at the picture I attached of the drum. You need to measure the inner diameter of your trailer's drums to determine which brakes you need. You may also be able to use the axle capacity but the drum diameter is the better way.
For 10 inch brakes I recommend # AKEBRK-35-SA or for 12 inch # AKEBRK-7-SA. Both are self-adjusting and include the left and right hand sides. They're marked because it does matter which side they go on when installed.
If you get 10 inch brakes you also need the nuts and washers, part # BRKH10B. For the 12 inch brakes you need the nuts, washers, and bolts, part # BRKH12.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- Redline
more information >
Mounting Bolts and Hardware for 12" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 12 Inch
- Bolts
- Redline
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Q&A: Replacement Trailer Brake Assemblies with Axletek-10-GG On Assemblies
- Q&A: Replacement Hub and Brake Assemblies that Fit Sure Trac 3,500 lb Axle
- Q&A: Are New Brake Drums Required if Replacing Electric Brake Assemblies on a Trailer