Do We Spray Or Coat Brake Assemblies In Factory Or Before Storage Or Shipping
Question:
Do you spray or coat the magnet in factory or before storage or shipping?
asked by: Mark
0
Expert Reply:
The Magnets on the Electric Trailer Brake Assembly # AKEBRK-35L are not sprayed or coated from the factory or here at etrailer.com. It is not a good idea to lubricate or oil the magnet or where it touches the hub.
However there is e-coat on the backing plate, pivot and where the brake shoes slide. That coating is only applied from the factory.
expert reply by:
Timothy G
0
Products Referenced in This Question
Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Product Page this Question was Asked From
Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Continue Researching
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Most Popular Wheel Bearings
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How Much Does a Boat and Trailer Weigh?
- Q&A: Which Brake Assembly Does Part Numbers B10E-21 & B10E-22 Correspond to?
- Q&A: Similar Tire Size Replacement for 7.50x16 That Is Radial Construction
- Article: Trailer Maintenance Schedule
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Which Replacement Electric Brakes For 10" Drum Stamped KA90831
- Q&A: Bushing and Bolt For Equalizer 13-140-3 Rear Spring Attachment
- Q&A: Replacement For 8,000 lb A-Frame Trailer Coupler With 2-5/16 Inch Hitch Ball
- Q&A: Will The In Bed 7-Way Fit On a 2023 Ford F-150 With In Bed Power Outlet?