Leaf Spring Replacements Compatible With 10K Trailer With Dual Axles
Question:
I have a dual Axel trailer thats rated for 10k pounds with a broken spring. Do I have to buy a spring of 10k pounds or less than 10k pounds?
asked by: Ernesto C
Expert Reply:
For your replacement leaf spring on your 10K trailer with dual axles, you will want a spring rated at 2,500 lbs capacity or more so the 2 springs that attach to your axle will not limit your trailer capacity.
For instance we have the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long # e44SR or the 4-Leaf Slipper Spring w/ Hook End for 5,000-lb Trailer Axles - 26-5/8" Long # SP-231275 each rated for 2,500 lbs.
The measurements of your current springs will also be an important factor. I've attached an article to assist.
Products Referenced in This Question
4-Leaf Slipper Spring w/ Hook End for 5,000-lb Trailer Axles - 26-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Hook End
- 5000 lbs
- 2 Inch Wide
- 4 Leaf
- 26-5/8 Inch Long
- Painted
- Universal Group
more information >
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 5000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/4 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
- Article: Slipper Spring Trailer Suspension System Review
- Video: Redline Trailer Suspension - Leaf Spring Suspension - H238 Review
- Search Results: h238
- Video: Review of Dexter Trailer Leaf Spring Suspension - Hangers - Suspension Kits - AP202-H202
- Shop: Tandem-Axle Trailer Hangers for 2" Slipper Springs
- Shop: Dexter 4-Leaf Slipper Spring w/ Hook End for 2,500 lb Trailer Axles - 26-3/4" Long
- Shop: 4-Leaf Slipper Spring w/ Hook End for 5,000-lb Trailer Axles - 26-5/8" Long
- Shop: Tandem-Axle Trailer Hangers for 2" Slipper Springs - 5" Front, 6-3/8" Rear
- Q&A: Spring Spring Hanger Spacing for Spring e46SR
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Search Results: slipper springs
- Shop: Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter
- Q&A: Spring Hanger Spacing Dimensions for a Tandem Axle Slipper Spring Suspension on a 14,0000 lb Trailer
- Q&A: How to Determine Hanger Spacing on a Tandem-Axle Trailer Hanger Kit for Slipper Springs
- Q&A: Do Suspension Hangers Need to Welded on Or Can They be Bolted On
- Search Results: 91635b
- Search Results: ap202
- Search Results: 7~1~1
- Search Results: 13~4
- Video: Review of etrailer 2 Leaf Slipper Spring - e36SR
- Search Results: slipper spring hanger kit
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 13-4 Review
- Q&A: Can Radius End Leaf Spring Be Used to Replace Flat End Leaf Spring
- Q&A: What Causes Trailer Leaf Springs To Break Continuously
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Most Popular Wheel Bearings
- Q&A: Can 3,500 lb Axle Trailer Leaf Spring 25-1/4 inch get Replaced with 5k Rated Spring