What is the Torque Spec of the Factory U-Bolts on a 2011 Toyota Tacoma

Question

Question:

I have item number SSR-610-40 on order for my 2011 Toyota Tacoma quad cab short box sport package truck. I am looking for the torque spec on the U bolts when installing item number SSR-610-40. I have found numbers from 52 ft lbs to all the way up to 95 ft lbs. Also, do I need to use loctite on the U bolts?

asked by: Doug

0

Expert Reply:

I called my contact at SuperSprings and they informed me that in order to obtain the specifications as to how many foot pounds of torque needs to be applied to the factory u-bolts, you would need to obtain your VIN and contact the manufacturer. Another option you have would be to contact your local repair shop who has access to a program called, "ALLDATA". Unfortunately, these are the only options I have for you to determine the correct torque spec for the factory u-bolts on your 2011 Toyota Tacoma. You would not need to use loctite on the factory u-bolts, just the studs on the SumoSprings Solo Custom Helper Springs part # SSR-610-40.

expert reply by: Conner L

0

Answer 1

You can increase the size of the wheels and tires on your boat trailer so long as you have enough room in the wheel/fender wells. Normal suspension travel usually dictates no less than 4-inches of clearance at the top of the tire. Provided you have…

view full answer...

Answer 2

Those are very good questions and let's start with the capacities of both systems. The SumoSprings Solo Custom Helper Springs #SSR-612-40 has a 500 lb capacity and SumoSprings #SSR-612-47 has a 1,000 lb capacity, which means that is the highest…

view full answer...

Answer 3

I'd go with the lighter duty SumoSprings for your 2017 Toyota Tundra for the reason you mentioned. The heavier duty ones will be much harsher. I only recommend the higher duty ones for people who plan to be at the capacity of their vehicle most…

view full answer...

Answer 4

It's going to vary some from vehicle to vehicle just because of how your truck rides. However, I reached out to SuperSprings and they told me that a half inch to an inch of clearance between the spring and the frame is fairly standard. The…

view full answer...

Answer 5

The various SuperSprings jounce springs made for the 2018 Tundra are produced in different colors as an indication of their weight capacities. The yellow springs such as rear-axle kit #SSR-610-54 are heavy-duty springs with a 2800-lb leveling…

view full answer...

Answer 6

Adding a suspension enhancement system like the SumoSprings #SSR-610-40 that you referenced might help to relieve some of the pressure you are having to put on your weight distribution system, but the actual benefits will be pretty minimal. This is…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...