Adapter Availability for Going From Euro 7-way to American 4-Way  

Question:

Expert Reply:

Basically there is no easy way to convert the European 7-Way to a US 4-Way. We do not carry any kind of adapter that you could use. You are left with 2 options. First, you would install a separate wiring harness which would be the easiest. Or, you could attempt to fabricate an adapter.

You would need to use a converter, # RM-732. The red wire on the input side would attach to the brake light wire on the vehicle wiring. The white wire grounds to the frame. The yellow wire will attach to the left turn signal wire on the vehicle. The green wire will attach to right turn signal.

The out put side only has 2 wires. Yellow, which will be combined left turn and brake, and green for combined right turn and brake. To get the running lights, attach a wire to either running light circuit on the vehicle trailer wiring, and route the other end of the wire directly to a 4-Way vehicle side connector like # 18002.

You probably will not need the whole 60 inches on the 18002 harness so clip off the excess wire as needed. The yellow and green wires on the converter out put side will match the yellow and green on the 4-Way. The running light wire you ran goes to the brown wire. Ground the white wire directly to the frame.

This should give you the function you need but it should only be used as a temporary solution. The best way to add a 4-Way US style trailer connector is to have it installed in addition to the connector you already have.

expert reply by: Jameson C

0

David B.

4/20/2018

I contacted you about an adapter for a Euro round to 4 flat trailer adapter. I found this product that your rep said doesnt exist. Just an FYI

Reply

Jameson C.

4/20/2018

That adapter # 118710 does match the connector styles but it won't convert the taillight signals like you'll need. It's for Land Rovers with that Euro style connector but isn't wired like one. It's a confusing situation but we've had people try it with actual Euro style connectors and the signals aren't converted properly. It's basically only designed for Land Rovers.

Reply