Are Bottom Portion of the Cradle Set # INA451 Available

Question

Question:

Can i purchase the clamp portion as i only have the pad. Better question may what do i need to make this fuctional Re attached photo.

asked by: Veronica

0

Expert Reply:

I wish that we had the lower bracket part of the Cradle Set # INA451, but unfortunately these are sold together so you need the complete kit to replace the brackets.

expert reply by: Jon G

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 5

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

You will want a bow/stern tie-down for each kayak so the Yakima Bow/Stern Tie-Down Ropes w/ Ratchets and Strap Loops #Y04031 will cover the other two kayaks. You may also want the #Y07416 to go with them. I reached out to Yakima about the additional…

view full answer...

Answer 8

Landing pad covers #Y8890029 are really the only option. You could always uninstall before the wash and reinstall the crossbars after if you don't like the way it looks. You could also stick to brushless car washes where nothing could get caught…

view full answer...

Answer 9

There is not a direct replacement for your series 6300A model 6325 power converter. The 25 amp converter with 12V power can be replaced with the Progressive Dynamics Inteli-Power RV Converter and Battery Charger - 12V - 30 Amps #PD9130 which will…

view full answer...

Answer 10

I'll start off with the ski rack for your 2024 Jeep Grand Cherokee Laredo since that is fairly simple. I recommend the Rhino-Rack Ski and Snowboard Carrier #RR574. This is capable of holding 4 pairs of skis, has an aluminum construction for…

view full answer...

Answer 11

For a kayak trailer, I'm a fan of Malone's trailers. I personally did a video on their Malone MegaSport Trailer with Saddle Style Carriers #MPG550-U since I'm a big fan of the saddle style carriers as well as their cargo boxes designed…

view full answer...

Answer 12

The Inno #INA451 is meant to work as an extra cradle set with the Inno J-style 2 Kayak carrier. The straps and mounting hardware is included (this is shown in one of the thumbnail photos in the product description). If the #INISF715 round bar adapter…

view full answer...

Are Bottom Portion of the Cradle Set # INA451 Available

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching