Trailer Hitch and 7-Way Trailer Wiring Connector Recommendation for 2014 Jeep Grand Cherokee
Question:
Can I get a kit for 7 pole harness and receiver for my 2014 jeep grand cherokee limited without factory tow?
asked by: Tom C
Expert Reply:
Yes, for a trailer hitch confirmed as a fit for your 2014 Jeep Grand Cherokee Limited we have the Draw Tite hitch part # 75699 which is a confirmed fit and would work well. This is a 2 inch hitch with plenty of capacity and has a great price. I attached an install video for this for you to check out as well.
To install a 7-way you will have to first install a 4-way and then convert it to a 7-way as needed. For the 4-way you'd want the part # 118727.
Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way.
If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Determining Trailer Tongue Weight
- Q&A: Tool for Adjusting Drum Brakes on Drop Axle
- Q&A: Curt Triflex Brake Controller Displays 05 and Trailer Brakes Not Working with Brake Pedal
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: 10K Torsion Axle Compatibility With Disc Brakes
- Q&A: Heavy Duty Trailer Hitch Receivers For 1989 Chevrolet C/K Crew Cab Pickup
- Article: What is the Best Trailer or RV Storage Cover
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Class I Trailer Hitch for a 2021 Mercedes-Benz E-450
- Q&A: Install Pictures for the Curt Hitch part # C13065 on a 2014 Jeep Grand Cherokee
- Q&A: Does The Curt SecureLatch Lunette Ring CU49FR Come With Hardware? What Kind Of Bolts?
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Trailer Tire Sizing