How to Install the Tekonsha Prodigy P3 Brake Controller Part # 90195 on a 2017 Chevy Express Van

Question:

Which wires hook up to Tekonsha 90195 wires? I have a blue, black, red/white and a thin light blue? Tow package wiring for 2017 chevy express 2500

asked by: Bryant

Expert Reply:

In order to determine the correct wires to splice into when installing the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 on your 2017 Chevrolet Express Van, you will need to use a circuit tester like part # PTW2993 and test them for function.

The black wire goes to the battery with a 40 amp circuit breaker like part # 9510 placed 6" from the positive terminal, the red wire is for the stop light switch which goes to the cold side of the brake pedal or the wire that only receives power while the pedal is depressed, the white wire is for the ground which will need to be ran to a bare metal surface, and the blue wire is for the brake output which should be attached to the brake output wire located under the dash near the emergency brake pedal.

expert reply by: Conner L