bing tracking image
Q & A Icon

Hardwiring the Tekonsha Voyager # 39510 in a 2015 GMC Yukon  

Question:

Trying to match up my tekonsha voyager with gmc wiring harness that was in my glove box. 2015 GMC Yukon SLT 4WD. Is there a diagram for wiring this up?

0

Expert Reply:

To install the Tekonsha Voyager # 39510 in your 2015 GMC Yukon you will first need to locate the wiring harness that is up under your driver side dash. You then need to connect the following wires from the Pigtail # 20127 to the following functions:

Black - 12V Power
White - Ground
Blue - Brake Controller Output to 7-Way
Red - COLD Side of Stop Light Switch (only gets hot when brake pedal is pressed)

To make sure you connect everything correctly you need to use a circuit tester like part # PTW2993. I am attaching a link to an installation video of the Tekonsha Prodigy P3 # 90195 being installed on a 2013 GMC Yukon that you can use as a reference. Please note that sometimes the wire colors can change so it is important to test the wires prior to installation.

expert reply by:
0
Jon G
click to enlarge

Products Referenced in This Question




Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>