Recommended Install Method for the Ultra-Fab Ultra Scissor Jacks # UF48-979002 on 2 inch Wide Frame

Question

Question:

The frame is 2 inches wide, which isnt as wide as the mounting plate. Will that be an issue?

asked by: Ryan

0

Expert Reply:

The Ultra-Fab Ultra Scissor Jacks # UF48-979002 can fit on a 2 inch wide trailer frame. Since it's a bit narrower than what the mounting plate fits we'd strongly recommend you weld these to the trailer instead.

expert reply by: Jameson C

0

Answer 1

If you look at the photo I've provided, you can see the dimensions of the mounting holes of the Ultra-Fab #UF48-979002 stabilizing jacks. You could indeed use U-bolts if you were able to find the proper size, but the jacks are usually bolted…

view full answer...

Answer 2

The Ultra-Fab Ultra Scissor Jacks part #UF48-979002 will work well to replace the weld on jacks on your trailer. You just want to make sure the width of the foot plate is not going to be an issue. The mounting plates of the 2 Ultra-Fab stabilizer…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Hey Ted, so if you look in the bed of your truck and see 5 holes/pucks that would mean you have the OEM prep. I'd assume if you had it you'd have seen them by now. If you had it you'd only need a ball like the part #C60618. If you…

view full answer...

Answer 5

The Air Lift LoadLifter 7500 XL Air Helper Springs #AL57531 will fit your 2022 Ram 3500 Mega Cab with single rear wheels. This is the extra heavy duty 7,500 lb kit so it is most commonly used on dually trucks, but it will fit single rear wheel models…

view full answer...

Answer 6

Yes, we do! It is Curt Custom Underbed OEM-Style Gooseneck Hitch item #C60633. This gooseneck hitch is confirmed to fit both the 6-1/2' and 8' bed lengths of the new 2024 Ram 2500. It has a massive 35,000 lbs capacity and installs in…

view full answer...

Answer 7

Hey Chris, it sounds like all you'd need to connect the MB Sturgis Propane Extension Hose for Small Appliance #100284-144-MBS to the Camco Automatic Changeover 2-Stage Propane Regulator for Dual Propane Tanks #CAM59005 is the MB Sturgis…

view full answer...

Answer 8

As long as the RBW Lil' Rocker mounts to industry standard base rails you'll need the Curt Adapter Rails #C29BR that fit in the OEM puck system on your 2019 Ram 2500 and give you a standard base rail connection. I'm attaching a photo…

view full answer...

Answer 9

So for your set up, a 2021 Ram 2500 short bed with the RamBoxes, you will need to use a Sidewinder in order to have the clearance to tow a 5th wheel. The Goose Box doesn't move the pivot point and an offset ball just won't be enough for…

view full answer...

Answer 10

Hey Jay. It sounds like you are on the right track here because a sidewinder pin box will be your only option for pulling your 5th wheel since you have a short bed truck with the Rambox. That said, you are right that the Reese Sidewinder cannot be…

view full answer...

Answer 11

There is a way to to a fifth wheel trailer with your 2020 Ram 2500 that has the Ramboxes but you have to install a Sidewinder pin box on the trailer so that the pivot point is raised up high enough that there isn't interference between the pin…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Recommended Install Method for the Ultra-Fab Ultra Scissor Jacks # UF48-979002 on 2 inch Wide Frame

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching