Could LED Interior Light of Trailer be Powered From 4-Way Wiring
Question:
Hello, I have an 5x8 enclosed trailer with a 4 pin connector. The trailer have a led light inside of it. I was wondering I can tap into the existing led wire to run two 36watts led bar?
asked by: Sarith P
0
Expert Reply:
Trailer 4-way wiring normally doesn't carry a 12 volt auxiliary circuit that would typically get used for powering trailer interior lights, but if you wanted to power an LED interior light off of a current circuit you have you'd be fine to do so since LEDs draw such a small amount of amperage.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Troubleshooting Lack of 12V Power at 7-Way Trailer Connector on 2019 Ford F-150
- Article: Trailer Lighting Requirements