Location of the Plug-In Brake Controller Port on a 2000 Ford Expedition

Question:

i have searched and uhaul has searched.. we cant find the quick connect for a brake controller under the dash of my 2000 ford expedtion.. any suggestions?

asked by: MaryAnn

Expert Reply:

If you take a look at the :20 mark in the attached video on a 2000 Ford Expedition, the location of the brake controller port will be shown. It is a grey connector and may be taped to other wires in the harness as well but should still be in this general location. The correct adapter for Tekonsha brake controllers is part # 3035-P.

If your vehicle did not come with a factory trailer connector then you will need to use both part # 118344 and part # ETBC7 to complete your wiring. If your vehicle only came with a factory 4-way trailer connector then you will only need to use the 4 to 7-way adapter part # ETBC7. If you vehicle came with a factory 7-way trailer connector then all you need is the plug-in adapter part # 3035-P for Tekonsha brand controllers.

expert reply by: Conner L