Recommended Best 2 Inch Receiver Lock for Strength and Reliability

Question

Question:

The best most reliable and strongest 2inch Receiver locks that you know of. Even if you do not sell them please let me know where I can purchase them

asked by: Peter

0

Expert Reply:

I think the Blue Ox Trailer Hitch Receiver Lock for 2" Hitches # BX8858 is the best and most reliable receiver lock. It has the tube key and the cover to keep dirt and grime out of the lock.

Since you are obviously towing, you may also want to consider a coupler lock for your trailer. I recommend the Fastway Universal Trailer Coupler Lock # FA86-0015-318. This is the most universal fit lock and the most reliable I've found for deterring theft. It surrounds the coupler and has a tube key which is far more difficult to pick.

expert reply by: Jason S

0

Answer 1

The Curt Rebellion XD like part #C45949-2516 and the Gen-Y Torsion 2-Ball Mount #325-GH-1124 are the two most advanced cushioned ball mounts. As far as cushioning goes the Gen-Y is the winner as it has a design that allows for more cushioning…

view full answer...

Answer 2

Since you have such a light boat trailer I recommend the Curt Rebellion XD #C83WR. This will work better with the lighter amount of tongue weight that you have of 400lbs. The hitch will also be much easier to use for you as it weighs only 43lbs…

view full answer...

Answer 3

The Curt Rebellion XD #C45949 has a 1-1/4" ball hole diameter, so any hitch ball that has a shank with that diameter will fit and allow you to tow a trailer with that size coupler. For example, if you've got a trailer with a 2" coupler,…

view full answer...

Answer 4

I can end this debate for you real fast! Trailer tires, which will have an ST in front of the size, should always be inflated to the maximum psi indicated on the tire. Trailer tires usually do not have a recommended and maximum psi indication so I am…

view full answer...

Answer 5

There is not necessarily a specific lifespan that can be counted on with hitch lock like your Blue Ox Trailer Hitch Receiver Lock for 2" Hitches #BX8858. If it gets used heavily and a lot of stress on it then a lock can wear down quicker than…

view full answer...

Answer 6

Hi Chris; your 2022 Ford Expedition will have a Normally Closed application, and it is possible when installing the Roadmaster Brake-Lite Relay Kit #RM-88400 that you'll need Hy-Power Diode #RM-790. I can't say for sure because it's…

view full answer...

Answer 7

The EcoHitch Stealth Trailer Hitch Receiver #TL84CR sits right on the edge of the fascia so you would likely not need to trim it at all but may have to trim just a tiny bit under the vehicle right at the receiver tube if it fights you when you try to…

view full answer...

Answer 8

For a made in the USA aluminum ball mount we only have adjustable units like the Flash Secure 2-Ball Mount #DTSTBM6600-2S which includes stainless steel hitch balls as well. The Fulton #F97CR you found as well as the similar Curt #C74WR and Brophy…

view full answer...

Answer 9

The Blue Ox Trailer Hitch Receiver Lock, part #BX8858 is only available with one lock in a package. They do not have the Keyed-alike option. When ordering this lock you can change the quantity in your cart to add the second lock.

view full answer...

Answer 10

I attached a picture that has all of the dimensions of the Curt trailer hitch part #13573 that you referenced. I also attached an install video for you to check out as well.

view full answer...

Answer 11

We can get your 2022 Ford Expedition set up to be flat towed behind your Prevost motorhome with air brakes, and there are a number of parts you'll need, which I'll go ahead and list out for you below. The only thing to note is that there are…

view full answer...

Answer 12

Yes, we do. I have attached them below. This hitch is confirmed to fit the 1985 Chevrolet C/K Series Pickup with the 6' or 8' beds with a standard or step bumper and the cab and chassis models.

view full answer...