Bearing Kit for Unknown Trailer with Spindle Dimensions 1.7" 1.3" and 1.06"
Question:
Hello, Im searching for a set of bearings for an unknown brand trailer. My local auto parts store measured it for me as follows: Inner bearing 2.5 OD x 1.375inch ID x .6 wide Seal 2.5inch OD 1.7inch ID Outter bearing: 1.875 OD x 1.0625 ID x .6 wide. I need one set. Thanks
asked by: William H
0
Expert Reply:
The dimensions you mentioned mean the spindle on your trailer is a number 84 which is very common.
So for a bearing kit that fits this you'll want the part # BK2-100.
I attached an install video for this kit for you to check out as well.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hubs for Axle Spindle with 1.06 Inch Diameter
- Q&A: Spindle Recommendation for a Hub that Has Bearing Dimensions 1.06 and 1.38
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00