Is There a Replacement Seal for 10-40 with Double Lip?
Question:
I have a Dexter 8-248 hub. The grease seal I have is a 10-40, can I replace it with your 10-19 double lip seal? Thanks
asked by: Herb
0
Expert Reply:
For your 8-248 hub with # 10-40 grease seal, the 10-19 double lip # RG06-050 is not compatible. We don't have a double lip seal that will be compatible in size. I recommend you stick with the single lip seal # 10-40 as a replacement.
expert reply by:
Jason S
0
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.938 Inch I.D.
- 2.510 Inch O.D.
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Replacement for Dexter Mobile Home Axle Grease Seal 10-41
- Q&A: Which Bearings, Races, and Seal Fit Dexter Hubs 8-283
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Recommended Replacement For An Atwood GC6AA-10E Water Heater
- Article: Most Popular Wheel Bearings
- Q&A: What is the Inner Diameter of Trailer Bearings L44649 and L68149
- Q&A: How to Pick Out Bearings for a Dexter P-21 SLR Axle
- Q&A: Replacement Electric Brakes for Dexter PR-FF SEC-FF 5.2KPR-GGSEC-GG 12X2XQ 36-89
- Q&A: Looking for Replacement Lens for MCL81 Clearance Lamp on 1999 Southwind Motorhome
- Article: How to Measure for Trailer Hitch Drop
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)