Diameter of the Fan Shaft for Replacement Fan Motor for Ventline V2045 or V2244 Exhaust Fan

Question

Question:

Can you tell me the diameter of the shaft that the fan blade goes on? Mine ia a 3/16th.

asked by: Mark

0

Expert Reply:

On motor # BCD0390-00 the shaft is approximately 0.214 inches so it is slightly larger than 3/16 inches. If you can tell me what this is going on (a model number would be awesome) I can determine if we have a motor that will work.

expert reply by: Michael H

0

Answer 1

According to Ventline, the correct replacement motor for your model V2245-50 bathroom fan is the Replacement Fan Motor for Ventline Exhaust Fan #BCD0390-00.

view full answer...

Answer 2

According to Ventline the replacement motor you need for your Ventline part number V2245 is the part #BCD0390-00 that you referenced.

view full answer...

Answer 3

The correct replacement fan motor you need for your Ventline Breeze that has a 50 CFM fan is the part #BCD0388-00. The mounts are different and the electric connector is different so you wouldn't be able to use the #VC0369-00 instead.

view full answer...

Answer 4

I spoke with my contact at Ventline and she stated that for your V2245-50 exhaust fan you can use the Replacement Fan Motor #BCD0390-00. This will work perfectly with your existing fan.

view full answer...

Answer 5

We spoke with my contact at Ventline and she stated that for your V2245-50 exhaust fan you can use the Replacement Fan Motor #BCD0390-00.

view full answer...

Answer 6

For the V2244-50 Ventline vent the replacement motor is #BCD0388-00. For the fan blade use #BVA0311-02.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 9

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 10

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 11

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Diameter of the Fan Shaft for Replacement Fan Motor for Ventline V2045 or V2244 Exhaust Fan

Product Page this Question was Asked From

Continue Researching