Does the Front Portion of the TruXedo Deuce 2 Soft Tonneau Cover Lock

Question

Question:

Since this opens from the front and the back, does the front lock?

asked by: Daniel S

0

Expert Reply:

Yes, the front portion of the TruXedo Deuce 2 Soft Tonneau Cover part # TX746901 can be locked in place to negate access. If you take a look at step 14 in the attached instructions manual, you can see the locking mechanism and how to activate it. There is a pinwheel knob located on the cab rail that holds a lever in place that will need to be positioned towards the driver's side to lock the cover or towards the passenger side to unlock the cover.

expert reply by: Jameson C

0

Answer 1

The TruXedo Deuce 2 Soft Tonneau Cover - Hinged - Roll Up - Vinyl #TX748901 that you mentioned is only a fit for the 2021 Ram 3500 8 foot bed but there is a version for other bed sizes. -If you have the 6-1/2 foot bed without the RamBox then the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

To be completely honest the sway control feature of the B and W Continuum part #BW78FR isn't nearly as advanced as the rest of the system. The advertised sway control of this system is in the head of the system between where the ball and the…

view full answer...

Answer 5

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. Measuring is not required if you just take a look at your coupler and see where it attaches to…

view full answer...

Answer 6

The vast majority of trailers on the market use a standard coupler (installed on top of the trailer frame) which is compatible with the B&W Continuum Weight Distribution System w/ Sway Control #BW28FR. Underslung couplers aren't as common but…

view full answer...

Answer 7

The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese Strait-Line. The…

view full answer...

Answer 8

To select the correct B&W Continuum Weight Distribution System for your needs you will first need to determine if you have a standard coupler(mounts on top of trailer frame rails) or an underslung coupler(mounts on the bottom of the trailer frame…

view full answer...

Does the Front Portion of the TruXedo Deuce 2 Soft Tonneau Cover Lock

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching