Hitch, Wiring, Ball Mount and Hitch Ball for 2012 Ford Escape Without Factory Tow Package
Question:
I want to make sure this is the right hitch to fit my 2012 ford escape #136050 also the right wire harness without factory set up thank you
asked by: Lester
Helpful Expert Reply:
Curt 2-inch Class III hitch # 13650 is a USA-made hitch that fits the hybrid and standard versions of the 2012 Ford Escape. This hitch offers no-drill installation on the Escape without a factory hitch. An install video is linked for you along with the written instructions from Curt.
For a 4-pole wiring harness for the Escape without the factory tow package use part # 118251 if you do NOT have the backup sensors. Models WITH backup sensors can use # 118551.
For a ball mount for towing you can use recommended Curt part # C45030 along with 2-inch hitch ball # 63845 or 2-5/16-inch ball # 63847.
Several helpful articles on hitch installation and towing are also included for you.
Products Referenced in This Question
Tow Package Wiring Harness with 4 Pole Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
2-5/16" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Difference Between Curt 13650 and 13651 on 2008 Ford Escape
- Q&A: Trailer Brake Controller Fuse Location on 2014 Ram 2500
- Q&A: 2022 Chrysler Pacifica Hybrid 2 Inch Trailer Hitch Recommendation
- Q&A: Differences between the Curt Trailer Hitch # C13651 and # 13650 for a Ford Escape
- Q&A: Bolt Fishing Wire for the Installation of a Curt Hitch on a 2006 Ford Escape
- Q&A: Adding a 7-Way Trailer Connector on a 2012 Ford Escape to Use Prodigy RF Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Determining Trailer Tongue Weight
- Q&A: Will Yakima StageTwo Bike Rack Work with Front Fender Bike
- Article: How to Measure for Trailer Hitch Drop
- Article: What is Boondocking
- Article: My Trailer Hitch Doesn't Fit